Map Ip Dscp (Global Configuration); Map Ip Dscp (Interface Configuration); Show Map Ip Dscp - SMC Networks 6152PL2 Management Manual

4
Command Line Interface
This command shows the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
• port-channel channel-id (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1 0
Eth 1/ 1 1
Eth 1/ 1 2
Eth 1/ 1 3
. .
.
Eth 1/ 1 61
Eth 1/ 1 62
Eth 1/ 1 63
Console#
Related Commands

map ip dscp (Global Configuration) (4-368)

map ip dscp (Interface Configuration) (4-368)

4-370
0
0
0
0
0
0
0