Table of Contents
Advertisement
4
Command Line Interface
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see ?$paratext>? on
page 3-180.
Example
Console#show interfaces counters ethernet 1/7
Ethernet 1/7
Iftable Stats:
Octets Input: 335955, Octets Output: 359180
Unicast Input: 0, Unicast Output: 0
Discard Input: 0, Discard Output: 0
Error Input: 0, Error Output: 0
Unknown Protos Input: 0, QLen Output: 0
Extended Iftable Stats:
Multi-cast Input: 4642, Multi-cast Output: 4921
Broadcast Input: 258, Broadcast Output: 6
Ether-like Stats:
Alignment Errors: 0, FCS Errors: 0
Single Collision Frames: 0, Multiple Collision Frames: 0
SQE Test Errors: 0, Deferred Transmissions: 0
Late Collisions: 0, Excessive Collisions: 0
Internal Mac Transmit Errors: 0, Internal Mac Receive Errors: 0
Frames Too Long: 0, Carrier Sense Errors: 0
Symbol Errors: 0
RMON Stats:
Drop Events: 0, Octets: 695199, Packets: 9827
Broadcast PKTS: 264, Multi-cast PKTS: 9563
Undersize PKTS: 0, Oversize PKTS: 0
Fragments: 0, Jabbers: 0
CRC Align Errors: 0, Collisions: 0
Packet Size <= 64 Octets: 9261, Packet Size 65 to 127 Octets: 176
Packet Size 128 to 255 Octets: 377, Packet Size 256 to 511 Octets: 13
Packet Size 512 to 1023 Octets: 0, Packet Size 1024 to 1518 Octets: 0
Console#
show interfaces switchport
This command displays the administrative and operational status of the specified
interfaces.
Syntax
show interfaces switchport [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number. (Range: 1-28/52)
• port-channel channel-id (Range: 1-8)
Default Setting
Shows all interfaces.
4-232
Advertisement
Table of Contents
