Network Wiring Connections; Figure 4-2 Network Wiring Connections - SMC Networks 6152PL2 - annexe 1 Installation Manual

Network Wiring Connections

Today, the punch-down block is an integral part of many of the newer equipment
racks. It is actually part of the patch panel. Instructions for making connections in the
wiring closet with this type of equipment follows.
1. Attach one end of a patch cable to an available port on the switch, and the other
end to the patch panel.
2. If not already in place, attach one end of a cable segment to the back of the
patch panel where the punch-down block is located, and the other end to a
modular wall outlet.
3. Label the cables to simplify future troubleshooting.
Switch
SMC6128PL2 25 27
25 27
TigerSwitch 10/100
Link/Act
System 26 28
26 28 27 28
Patch Panel

Figure 4-2 Network Wiring Connections

Twisted-Pair Devices
Equipment Rack
(side view)
Punch-Down Block
Wall
4
4-3