Network Wiring Connections; Figure 4-2 Network Wiring Connections - SMC Networks 6824MPE INT - annexe 1 Installation Manual

M N
AKING ETWORK

Network Wiring Connections

Today, the punch-down block is an integral part of many of the newer
equipment racks. It is actually part of the patch panel. Instructions for
making connections in the wiring closet with this type of equipment follows.
1. Attach one end of a patch cable to an available port on the
SMC6824MPE switch, and the other end to the patch panel.
2. If not already in place, attach one end of a cable segment to the back of
the patch panel where the punch-down block is located, and the other
end to a modular wall outlet.
3. Label the cables to simplify future troubleshooting.
TigerStack III 10/100
6824MPE
Slave
Master
4-4
C
ONNECTIONS
Switch
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 11 13 23
Link/Act PWR
25 26
Console PoE Diag
25
26 Stacking
Mode
2 12 14 24 PoE/Link
Patch Panel

Figure 4-2 Network Wiring Connections

Equipment Rack
(side view)
Punch-Down Block
Wall