Making Vlan Connections; Figure 2-5 Making Vlan Connections - SMC Networks 6152PL2 - annexe 1 Installation Manual

2
Network Planning

Making VLAN Connections

These switches support VLANs which can be used to organize any group of network
nodes into separate broadcast domains. VLANs confine broadcast traffic to the
originating group, and can eliminate broadcast storms in large networks. This
provides a more secure and cleaner network environment.
VLANs can be based on untagged port groups, or traffic can be explicitly tagged to
identify the VLAN group to which it belongs. Untagged VLANs can be used for small
networks attached to a single switch. However, tagged VLANs should be used for
larger networks, and all the VLANs assigned to the inter-switch links.
These switches also support multiple spanning trees which allow VLANs groups to
maintain a more stable path between all VLAN members. This can reduce the
overall amount of protocol traffic crossing the network, and provide a shorter
reconfiguration time if any link in the spanning tree fails.
R&D
VLAN 1
Tagged
Ports
VLAN 2
Testing
Note: When connecting to a switch that does not support IEEE 802.1Q VLAN tags, use
untagged ports.
2-6
SMC6128PL2
Link/Act
System
Untagged Ports
VLAN
unaware
Finance
switch
Marketing
VLAN 3
VLAN 4

Figure 2-5 Making VLAN Connections

25 27
26 28
Tagged Port
Finance
VLAN 3
25 27
TigerSwitch 10/100
26 28 27 28
VLAN
aware
switch
R&D
Testing
VLAN 1
VLAN 2