Power Supply Cable; Connecting Accessories; Video Source (Pal); Rv 5100 Reversing Camera / Rv 5100 (Pal/50Hz) - VDO TV 5100 Owner's Manual

Power supply cable

Cable
Connection
colour
Red +12 V ignition positive (Terminal 15)
Black Earth
White - (not used)
Green Reversing signal (for reversing camera)
Yellow Handbrake signal
1. Connect red lead of the power supply cable to the 12V ignition positive (e.g. to the
A7 pin of the ISO-A plug on the navigation computer).
2. Connect black lead to earth (e.g. to A8 pin of the ISO-A plug on the navigation
computer).
3. Connect yellow lead to the handbrake switch, using the supplied cable to extend the
lead if necessary (switch is earthed when brake is activated).
4. If a reversing camera is connected: connect green lead to the reversing signal (e.g. to
the A2 pin of the ISO-A plug of the navigation computer).
5. Insert power supply cable plug into the 12V DC INPUT socket of the TV tuner. Ensure
that the plug latch is engaged.

Connecting accessories

Video source (PAL)

System without multimedia interface box:
An additional video/audio source can be connected to the TV tuner.
Connect appropriate Cinch cable to the AV input of the tuner.
System with multimedia interface box:
In this case, any additional video/audio source is connected via Cinch cable to the second
AV socket of the interface box (IN 2).

RV 5100 reversing camera / RV 5100 (PAL/50Hz)

Observance of the following instructions is essential in order to ensure that the automatic
image display of the reversing camera functions correctly when reverse gear is engaged:
System without multimedia interface box:
1. Insert mini-DIN plug of the reversing camera in the CAMERA INPUT socket of the TV
tuner.
System with multimedia interface box:
1. Connect reversing camera to the "Camera PAL" socket of the interface-box power
supply cable.
INSTALLATION INSTRUCTIONS
21