Manual Station Selection/Storage; Erasing Stations From Memory; Selecting Stations; Mute Function - VDO TV 5100 Owner's Manual

OPERATION

Manual station selection/storage

The automatic storage process may possibly ignore faintly or poorly received stations.
However, should you wish to view/store such a station despite the poor reception:
1. Use the numeric keys of the remote control to enter the channel number of the rele-
vant station.
The image transmitted by the desired station is displayed.
To store the station currently being viewed :
2. Press the SAVE key.
"Erase CH" (erase channel) appears on the screen.
3. Press the << or >> keys to switch over to the "Memory CH" (store channel) function.
4. Now press the SELECT key.
The station is now included in the station memory.
1 If no keys are pressed, the screen switches back to the TV display mode after about
4 seconds.

Erasing stations from memory

If you wish to erase a stored station (e.g. because it is already available on several other
channels), proceed as follows:
1. Press the SAVE key.
"Erase CH" (erase channel) appears on the screen.
2. Now press the SELECT key.
The station will now be erased from the station memory.

Selecting stations

Use the CH+ or CH- keys to switch over to the next station with a higher or lower channel
number in the station memory.
1 Stations which have not been stored can be selected by using the numeric keys of the
remote control to enter the relevant channel number.

Mute function

The TV sound is muted by pressing the MUTE key. The muting is reversed by pressing the
MUTE key once more.

Volume Control

Volume control is performed on the MM 5000 monitor or on any appliances (e.g. car radio
or headphone amplifier) which may be connected to the AV output. See also "TV sound
output via the car radio" on page 12.
10