Making The Electrical Connections; Tv Tuner To Interface Box (In Systems With Mi 5000 Multimedia Interface Box); Tv Tuner To Pc 5000 Computer (In Systems Without Mi 5000 Multimedia Interface Box); Ir Receiver - VDO TV 5100 Owner's Manual

INSTALLATION INSTRUCTIONS

Making the electrical connections

Lay all cables carefully. See illustrations at end of booklet for connection diagram.
Do not cut off non-assigned cables. Instead, wrap them up and tie them off. They could
be required for retrofitting additional functions.
A
Only connect electrical signals at suitable connecting points in the vehicle.
Ensure that the plug attachments engage.
TV tuner to interface box
(in systems with MI 5000 multimedia interface box)
1. Connect Cinch cable (not included) to A/V OUTPUT of tuner.
2. Insert opposite ends into the appropriate sockets on the first AV input (IN 1) of the
interface box.
TV tuner to PC 5000 computer
(in systems without MI 5000 multimedia interface box)
1. Unplug connecting cable between PC 5000 navigation computer and MM 5000
monitor at the computer.
2. Install MA 1210 Y-cable (option) between the two in accordance with the connection
diagram and plug in the mini-DIN plug of the Y-cable into the MONITOR OUTPUT
socket of the TV tuner.

IR receiver

1. Connect 3.5 mm IR receiver jack to the REMOTE INPUT socket of the tuner.

TV antennas (accessories)

Up to 4 TV antennas (e.g. VDO Dayton TVA 5100) can be connected via the ANTENNA
INPUT 1-4 antenna sockets of the tuner.
1 For assembly details please see installation instructions for antenna (supplied with the
antenna).
20