Installing Tv Tuner; Before Installing; Installing Infrared Receiver; Installation Location - VDO TV 5100 Owner's Manual

Installing TV tuner

Before installing:

Systems without a multimedia interface box should (preferably) be connected by an
MA 1210 Y-cable. This should be installed between the navigation computer and the
monitor connector cable. Ensure suitable cable routing and that the required cable length
is available for connecting the TV tuner.
1. Attach the TV tuner in a suitable position with the screws supplied.
In positioning the tuner, make sure to allow ample space for plugging the connector plug
into and out of the TV tuner whenever necessary. Audio/video connections should be
located for easy access in future.

Installing infrared receiver

Installation location

Select the installation position of the IR receiver so that there are no objects between it
and the remote control during normal operation of the remote control from the user's
position.

Attachment

The IR receiver is attached with the supplied adhesive pad:
1. Determine the installation position for the IR receiver.
A
Increased risk of injury in the event of an accident. Do not install components in the
inflation range of the airbag or in areas where the head or knees may knock against them.
2. Clean installation surfaces with methyl alcohol (spirit).
3. Peel protective foil away from one side of the double-sided adhesive pad and attach
pad to the bottom of the IR receiver.
4. Remove protective foil from the underside of the adhesive pad, place IR receiver in
the desired position and press it down firmly.
Note:
The installation temperature should be at least 15° Celsius so that the adhesive pad
can develop its full adhesive strength.
INSTALLATION INSTRUCTIONS
19