Operation; Remote Controls - VDO MS 5200 Owner's Manual

6

Remote controls

Depending on the scope of supply, various remote controls might be used. Full
functionality can only be ensured if the correct remote control is activated.
■
Activating the correct remote control
☞
Select "Settings –> Remote control" and activate the desired remote control by
pressing the OK button.
☞
If you additionally use a steering wheel remote control, activate this with a tick.
A
Please do not expose the remote control with inserted batteries to direct sunlight.
■
Active holder (accessory)
If you only use your remote control in its active holder, we recommend that you
remove the batteries from the remote control. The system can be operated when the
remote control is in its holder.
■
Battery change display
If the system no longer responds when the buttons are pressed or the battery symbol
( appears in the status line, the batteries of the remote control must be changed.
■
Replacing batteries (RC 5400)
☞
Open the battery compartment on the back of the
remote control.
☞
Remove the flat batteries.
☞
Insert two new Type AAA (micro) batteries. Ensure
correct polarity (marked in the battery
compartment).
☞
Close the battery compartment.
Notes:
In many countries, flat batteries may not be disposed of together with
the normal domestic rubbish. Please determine how to dispose of flat
batteries in accordance with local regulations.
Use only leak-proof batteries. Battery leakage can cause damage to
the remote control or to your vehicle.
Never expose the remote control to direct sunlight or extreme heat.
The batteries discharge at high temperatures and there is a risk of
leakage.

Operation