VDO MS 5200 Owner's Manual page 34

Message selection
Selection of the type of TMC traffic messages that should be displayed by the
navigation system and are to be taken into account for dynamic route planning.
☞
Select "Select all" or "Deselect all" if you would like to activate/deactivate all the
message types simultaneously.
☞
Store the modified settings using "Store".
☞
Press the ESC or the 4 button to exit the menu without changes.
✎
Urgent traffic messages (e.g. vehicle on wrong carriageway) cannot be deselected
and are always displayed.
Route criteria
Various criteria can be selected for route calculation:
❑ Fast: The route is optimized for the shortest possible driving time.
Suited to all situations.
❑ Short: The route is optimized for the shortest possible driving distance.
Recommended for trips within cities.
❑ Main roads: The route is calculated using the greatest number of main roads.
❑ No main roads: The route is calculated using the greatest number of secondary
roads. Recommended if you prefer to avoid routes via motorways.
✎
The symbol for the selected route criterion is displayed in the bottom status line.
You can also activate the following route options:
❑ Minimize toll roads*: Avoids toll roads.
❑ Minimize ferry usage*: Avoids ferries when calculating the route.
❑ Minimize tunnel usage*: Avoids tunnels when calculating the route.
❑ Dynamic route: Activates/deactivates the dynamic route planning.
✎
You can find the settings for the dynamic route planning under "Dynamic route",
see below.
☞
Store the modified settings using "Return".
☞
Press the ESC or the 4 button to exit the menu without changes.
* Availability of these functions depends on the map data used. If route planning is
not possible without the selected exceptions, toll roads, ferries and tunnels are
included in route planning.
Settings
33