VDO MS 4200 Owner's Manual page 42

NAVIGATION
4th Step: House number or junction
If house numbers are available for a selected road, they can be entered with a separate
input menu. If no house numbers are available, the system automatically jumps to the
" " input menu.
If no junction is available, this step will be skipped.
:
After confirming the road name with " ", the input menu for the house number
or junction appears.
Enter the desired house number or junction.
Within the database, certain ranges of house numbers are combined, the entered
house number being in such a range.
In such a case, the navigation system will lead you to the entered house number
range.
5th Step: Route selection
Once all data for the destination has been entered, the desired criterion for route
planning must still be selected.
Choose from one of the four following criteria:
–
Fastest: Fastest route preferred
–
Shortest: Shortest route preferred
–
Main roads: Motorways are preferred for route planning
–
No main roads: Avoid motorways for route planning
Additionally you can activate the option "
roads will be avoided.
If this option is activated, route planning may take longer.
Once the route criteria are selected, the system jumps to the guidance screen and be-
gins planning the route. Within only a few seconds you will begin to receive guidance
information.
Directly to guidance
While using the entry assistant, you can, at any time, jump to guidance, e.g. if certain
information on the destination address is unavailable (house number, crossroads) or if
you wish to be guided to the city or town limits only. In that case, proceed as follows:
Enter at least the name of a city as described earlier.
After the input, select the
:
The guidance screen appears.
The route is being planned.
For further information about guidance, see the chapter "GUIDANCE" on page 49.
44
symbol in the lower line of the input menu.
". Wherever possible, toll