Take Call / Alternate; Take /Reject Call; Hold Call And Establish 2Nd Connection - VDO MG 3000 M Owner's Manual

OPERATION

Take call / alternate

Take /reject call

With an incoming call, the message "Incoming call" appears on the monitor. Additionally,
the caller's number may also be displayed.
Accept the call by pressing .
The currently active call can be ended by pressing the ALT-R button (Abort) or by selecting
the symbol .

Hold call and establish 2nd connection

An existing call can be on hold and a 2nd connection can be established e.g. for calling
back. For this purpose:
1. Select the symbol .
The existing call is on hold (Wait) and the call number and if necessary the name appears
in grey.
2. Select the symbol .
The numbers field for entering the call number appears on the screen.
3. Enter the required call number and delete incorrect entries as necessary by selecting
the symbol .
4. When the required call number is displayed, select the symbol .
The following display appears on the screen.
f
m
N h
The active call is shown in black characters and the call on hold is shown in grey characters.
1 While the connection is being established, the display is also in grey characters.
1 Instead of "Call 1" or "Call 2", the name may appear under which the selected call
number is stored in the phone book.
The connection is established
18