Alternative Installation; Installing The Phone Holder, Fig. 3 - VDO MG 2100 Owner's Manual

Alternative installation

To extend the installation options, the monitor can also be fitted without the supplied
holder:
1. Stick the monitor without the monitor base directly onto the instrument panel (e.g.
double-sided adhesive tape).
1 Various other holders for fitting the monitor are available from accessory suppliers.
A
Always observe the safety measures regarding the driver's field of vision and the airbag
inflation range.

Installing the phone holder, Fig. 3

A
Always observe the safety measures regarding the driver's field of vision and the airbag
inflation range. Install the holder so that switches and levers, etc. are still just as easy to op-
erate.
1. Bolt on bracket at suitable location using 4 screws.
2. Secure phone holder onto bracket using the 4 screws supplied.
1 As an alternative, the holder may also be installed without the bracket using 2 screws.
The 2 caps will not be inserted into the holes of the phone holder until a later stage.
Note:
Depending on the phone holder, different plug-in retaining brackets are also supplied.
The retaining bracket to be used is visible on the stamped model designation of the mo-
bile phone.
Insert the retaining bracket at the top on the holder until it engages noticeably.
Keep the remaining retaining brackets for possible further use with other phones.
INSTALLATION INSTRUCTIONS
39