Switching Off; Start Screen; Field Strength Display - VDO MG 2100 Owner's Manual

OPERATION

Switching off

The hands-free unit is automatically switched off shortly after the ignition is switched off
(but calls in progress are not interrupted).
If there is a mobile phone in the holder, this also switches itself off automatically a short
time later. The monitor is also switched off shortly afterwards.
The system then goes into stand-by mode for approx. 15 minutes. During this time, a mo-
bile phone in the holder is recharged if necessary.
After approx. 15 minutes in stand-by mode, the system switches itself off completely.
1 Nokia mobile phones only:
If a button is pressed on the phone while the display shows that the phone will switch off
if not operated, the phone and the hands-free unit remain switched on.
15 minutes after the last use, the hands-free unit then switches off.

Start Screen

The following screen appears after the hands-free unit is switched on.
The name of the network operator is displayed under the title line (name of the respective
menu).
Symbols for particular functions are displayed on the bottom edge (for the meanings see
below) and these can be selected with the 4 and 6 cursor buttons.
These and all the other functions can also be called up via the main menu. To jump to the
main menu, in the start screen it is only necessary to press the MENU button on the re-
mote control.
1 Pressing the 8 button directly calls up the list of the last call numbers dialled. Pressing
the 2 button calls up the list of phone book entries. This makes call numbers quick to
find and select.

Field strength display

The field strength of the telephone reception signal is shown on the left edge by the
number of solid rectangles above the field strength symbol (max. 4).
13