Cd Operation; Maintenance - VDO CD 1204 Manual

CD OPERATION

SELECT TRACKS
During CD operation, press
or button (11)
◄◄
to advance or reverse to the previous track.
Press (13) or (14) button to advance 5
tracks up or reverse 5 tracks.
Track number shows on display.
During CD operation, hold
button (11) to
◄◄
fast forward or fast reverse.
CD play starts from when you release the
button.
PAUSE PLAYING
Press PAUSE by softkey F1 (7) to pause
CD player. Press it again to resume play.
REPEAT THE SAME TRACK
During CD operation, press softkey F3
button (9 ) to continuously repeat the
same track. Press again to stop repeat.
SCAN ALL TRACKS
During CD operation, press softkey F2
button (8) to play first several seconds of
each track on the current disc. Press again
to stop intro and listen to track.
PLAY ALL TRACKS IN RANDOM
During CD operation, press softkey F1
button (7 ) to play all tracks on CD in
random order. Press again to cancel the
function.
EJECT
Press button (15) to stop CD playing and
eject the disc from the disc slot (5).
Playing a CD-R
Depending on the type of CD-R CD,surface
condition of the disc, as well as the
performance and condition of the CD writer,
certain CD-R CD may not operate normally
on this unit.
button (10)
►►
Playing a copy protected nonconforming
audio CD
Due to use of copy protection schemes of
some audio CDs which are non
conformance to international audio CDs
standards (Red Book), these type of copy
protected disc(s) may not play on this unit.
button (10) or
►►

MAINTENANCE

The following suggestions help you care for
the product so that you can enjoy it for
years.
1. Keep the product dry. If it does get wet,
2. Keep the product away from dust and
3. Handle the product gently and carefully.
4. Wipe the product with a dampened cloth
5. Use and store the product only in normal
For CD Player
As dust tends to accumulate in the CD slot,
clean it every once in a while. Your CDs
can get scratched if you put them in a dusty
CD slot.
wipe it dry immediately. Liquids might
contain minerals that can corrode the
electronic circuits.
dirt, which can cause premature wear of
part.
Dropping it can damage circuit boards
and cases, and can cause the product
to work improperly.
occasionally to keep it looking new.
Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the product.
temperature environment.
High temperature can shorten the life of
electronic devices and distort or melt
plastic parts.
11