Turning Your Headset On And Off; Pairing It With Your Phone - Jabra JX20 PURA Getting Started

Charging your headset from your deskstand:
What you see
led off
st . led solid
st . led solid, 2nd . led pulsing
+2 led solid, 3rd . led pulsing
+2+3 led solid, 4th . led pulsing
+2+3 +4 led solid, 5th . led pulsing
all led´s solid
Check Battery status:
• When you are not in a call, tap either volume button .The led
will flash in accordance with the aC adapter/usb charger
sequence above .

turninG your headset on and off

• Gently turn the earpiece 90° clockwise to turn on the headset
(see fig . ) .
• Gently turn the earpiece 90° anti-clockwise to turn off the
headset (see fig . ) .

PairinG it With your Phone

The first time you turn on your Jabra JX20 Pura it will automatically
enter pairing mode . In this case skip directly to point 2 below .
When pairing with a second device, or if you need to pair
manually, start with point  below .
1. Put the headset in pairing mode:
• Turn the headset on .
• Press and hold the answer / end button until the led on the
back shines continuously .
What this means
no device in deskstand
device in deskstand
0-25% charged
25-50% charged
50-75% charged
75-00% charged
fully charged
Jabra JX20 Pura
5