Advertisement
Jabra Elite 25e features
Jabra Elite 25e is designed to be worn around the neck
The headset is supplied with three EarGel sizes: large, medium and small.
It is highly recommended to find the EarGel that best fits your ear for the optimal sound experience. The correct EarGel will feel tight and will seal out background disturbances.
To properly attach the EarGel, align the indent on the EarGel (as illustrated) with the ridge on the earbud, and press them firmly together.
The neckband can be shaped to fit your neck by bending the neckband at the Flex zones, for the ultimate comfort and stability.
The earbuds are magnetic and can snap together for convenient cable management. If you play music, your music will be paused when the earbuds are snapped together. If you have an active call, the call will be ended when the earbuds are snapped together. Go to section 6.1. for more information.
To charge the headset, gently pull open the charging cover to expose the micro-USB charging port and connect to a power supply. It is recommended to charge the headset using the supplied Jabra charging cable, however it is possible to charge the headset using your mobile phone charger.
It takes approx. 2 hours to fully charge the headset.
Note: The lifetime of the battery may be significantly reduced if the headset is left uncharged for a long period of time. It is recommended to recharge the headset at least once a month.
Full battery | |
Medium battery | |
Low battery | |
Pairing mode | |
Resetting |
On: Hold the Multi-function button for 3 seconds. The LED will flash green.
Off: Hold the Multi-function button for 5 seconds. The LED will flash red.
Calls & music | ||
Turn on headset | Press and hold (3 sec) the Multi-function button | |
Turn off headset | Press and hold (5 sec) the Multi-function button | |
Play/pause music | Tap the Multi-function button when not on a call | |
Answer/end call | Tap the Multi-function button when not on a call | |
Reject call | Double-tap the Multi-function button | |
Answer/end call | Detach/attach the Magnetic earbuds | |
Adjust volume | Tap the Volume up or Volume down button, when listening to music or on a call | |
Skip track forward | Press and hold (1 sec) the Volume up button | |
Skip track backwards | Press and hold (1 sec) the Volume down button | |
Battery status | Tap the Volume up or Volume down button, when not listening to music or on a call | |
Activate Siri/ Google Now/ Cortana | Tap the Voice button, when not on a call | |
Mute/un-mute microphone | Tap the Voice button, when on a call |
Headset voice guidance are voice announcements intended to guide you or give headset status updates (e.g. connection and battery status).
How to turn voice guidance On/Off
Voice guidance is enabled by default.
Voice Guidance On: Ensure the headset is powered on, and then simultaneously press and hold the Volume up button and the Voice button for 1 second.
Voice Guidance Off: Ensure the headset is powered on, and then simultaneously press and hold the Volume down button and the Voice button for 1 second.
Phone voice commands enable you to speak to Siri/Google Now/Cortana on your mobile phone using your headset. For more information on using Siri, Google Now, or Cortana, please refer to your phone's user manual.
Phone voice commands | ||
Activate Siri/ Google Now/ Cortana (phone dependent) | Tap the Voice button, when not on a call |
The headset can answer or reject calls when you are already on a call.
Multiple call handling | ||
End current call and answer incoming call | Tap the Multi-function button | |
Put current call on hold and answer incoming call | Press and hold (2 secs) the Multi-function button | |
Switch between held call and active call | Press and hold (2 secs) the Multi-function button | |
Reject incoming call, when on a call | Double-tap the Multi-function button |
The headset will vibrate whenever it is powered on/off, connected to your mobile phone, or when there is an incoming call.
Vibrate Alert is enabled by default, and can be disabled using the Jabra Assist app (Android only).
Resetting the earbuds clears the list of paired devices. After resetting, it is necessary to re-pair the headset to your smartphone.
Reset | ||
Reset the pairing list | Ensure the headset is powered on, and then simultaneously press and hold the Volume up button and the Multi-function button for 5 seconds. You will then need to re-pair the headset. |
The Jabra Assist app is a free app for iOS or Android devices that enables you to:
Android download - Google Play
iOS download - App Store
View the FAQs on Jabra.com/elite25e
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Elite 25e that isn't answered in the manual? Leave your question here.