Dell POWEREDGE SC440 Hardware Owner's Manual page 34

Table 2-8. Maintenance Options
Option
Service Tag
SERR Message
Load Defaults
Event Log
Table 2-9. POST Behavior Options
Option
Fast Boot
(On default)
Numlock Key
(On default)
POST Hotkeys
(Setup and Boot Menu
default)
Keyboard Errors
(Report default)
34
Using the System Setup Program
Description
Displays the system service tag. If the service tag is corrupted, the system
will prompt to enter the correct service tag upon entering the system
setup program.
Controls the SERR message mechanism. By default, this feature is On.
NOTE:
Some graphics cards require that the SERR message mechanism be
disabled.
Allows you to restore all System Setup options to their factory defaults.
Allows you to view the Event Log. Entries are marked R for Read and U
for Unread. Mark All Entries Read puts an R to the left of all the entries.
Clear Log clears the Event Log.
Description
When enabled, this feature reduces system startup time by bypassing
some compatibility steps. Off does not skip any steps during system
startup. On starts the system more quickly.
Determines the functionality of the numeric keys on the right side of
your keyboard. Off commands the right keypad keys to function as
arrows. On commands the right keypad keys to function as numbers.
Determines whether the sign-on screen displays a message stating the
keystroke sequence that is required to enter the Setup program or the
Quickboot feature. Setup & Boot Menu displays both messages
( and
F2=Setup F11=Boot Menu
message only (
F2=Setup
message only (
F11=Boot Menu
When set to Report (enabled) and an error is detected during POST, the
BIOS will display the error message and prompt you to press <F1> to
continue or press <F2> to enter System Setup.
When set to Do Not Report (disabled) and an error is detected during
POST, the BIOS will display the error message and continue booting the
system.
NOTE:
When detected, some errors (such as CPU or PCI fan failure) will
display an error message and prompt you to press <F1> to continue, or
<F2> to enter the Setup Menu.
). Setup displays the setup
). Boot Menu displays the Quickboot
). None displays no message.