Dell POWEREDGE SC440 Hardware Owner's Manual page 18

Dell computer hardware user manual
Hide thumbs Also See for POWEREDGE SC440:
Table of Contents

Advertisement

Table 1-6. System Messages (continued)
Message
Alert! CPU fan failure.
Alert! Error initializing
PCI Express slot n (or
bridge).
Alert! Incompatible
processor detected.
Alert! OS Install Mode
enabled. Amount of
available memory limited
to 256MB.
Alert! Previous fan
failure.
Alert! Previous attempts
at booting this system
have failed at checkpoint
[nnnn]. For help in
resolving this problem,
please note this
checkpoint and contact
Dell Technical Support.
Alert! Previous Processor
Thermal Failure
18
About Your System
Causes
The processor cooling fan is faulty or
the fan assembly is not installed
correctly.
The system encountered a problem
while trying to configure a PCIe
expansion card.
The OS Install Mode option in the
System Setup program is set to On.
This limits the amount of available
memory to 256 MB because some
operating systems will not complete
installation with more than 2 GB of
system memory.
The fan caused errors the last time the
system was used.
The system failed to complete the
boot routine three consecutive times
for the same error.
The processor overheated the last
time the system was used.
Corrective Actions
Ensure that the processor cooling shroud
is properly installed. See
"Troubleshooting System Cooling
Problems" on page 86 and
"Microprocessor" on page 62.
See "Troubleshooting Expansion Cards"
on page 93.
Use only Dell supported processors. See
the Getting Started Guide for a list of
supported processors.
After the operating system is installed,
enter the System Setup program and set
the OS Install Mode option to Off. See
"Using the System Setup Program" on
page 27.
Ensure that nothing is blocking the
airflow vents and that all fans are
properly installed and operating
correctly. See "Troubleshooting System
Cooling Problems" on page 86.
See "Getting Help" on page 107.
Ensure that nothing is blocking the
airflow vents and that all fans are
properly installed and operating
correctly. Also, ensure that the processor
heat sink is properly installed. See
"Microprocessor" on page 62.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge kh934

Table of Contents