Disabling A Forgotten Password - Dell POWEREDGE SC440 Hardware Owner's Manual

Table 6-2. System Board Connectors
Item Connector
1 12VPOWER
2 DIMM_1, DIMM_2, DIMM_3,
DIMM_4
3 BATTERY
4 FAN_MEM
5 FRONTPANEL
6 POWER
7 IDE
8 SATA0, SATA1, SATA2, SATA3 SATA drives
9 RTCRST
10 INTRUDER
11 SLOT1
12 SLOT2
13 SLOT4
14 SLOT3, SLOT5
15 AUX_LED
16 FLOPPY
17 FAN_CARD_CAGE
18 FAN_CPU
19 PSWD
20 CPU

Disabling a Forgotten Password

The password jumper on the system board enables the system password features or disables them and clears
any password(s) currently in use.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 41.
104
Jumpers and Connectors
Description
power
memory modules
battery socket
memory fan
front panel
main power
IDE drive
RTC reset jumper
chassis intrusion header
PCIe x1
PCIe x8
PCIe x4
PCI
auxiliary hard-drive LED
diskette drive
card cage fan
processor fan
password jumper
processor