by bending the earth electrode
carefully.
Make sure that the washer is in
good conditions. Once the
washer is fitted, finger tighten
the spark plug to avoid damag-
ing the thread.
Tighten using the spanner sup-
plied in the toolkit, make the
spark plug complete 1/2 of a turn
to press the washer.
CAUTION
TIGHTEN THE SPARK PLUG COR-
RECTLY. OTHERWISE, THE ENGINE
MAY OVERHEAT AND GET IRRE-
TRIEVABLE DAMAGED.
USE ONLY THE RECOMMENDED
TYPE OF SPARK PLUG, OTHERWISE,
THE ENGINE DURATION AND PER-
FORMANCE COULD BE COMPRO-
MISED.
Characteristic
Spark plug electrode gap
0.6 mm
Spark plug
NGKR BR8ES
Alternative spark plug
CHAMPION RN2C
Locking torques (N*m)
Spark plug tightening torque
70
toont, moet ze vervangen wor-
den.
Controleer de afstand van de
elektroden met een diktemeter.
Deze afstand moet 0,6 mmbe-
dragen; regel eventueel door de
elektrode van de massa voor-
zichtig te buigen .
Controleer of de bougie zich in
goede condities bevindt. Draai
de bougie manueel vast met de
rondel gemonteerd, om te ver-
mijden dat de schroefdraad
wordt beschadigd.
Sluit de bougie met behulp van
de in de gereedschapskit bijge-
voegde sleutel, door ze een 1/2
draai vast te draaien om de ron-
del vast te drukken.
LET OP
DE BOUGIE MOET GOED WORDEN
VASTGEDRAAID, OMDAT ANDERS
DE MOTOR KAN OVERVERHITTEN,
EN DUS ERNSTIG WORDT BESCHA-
DIGD.
GEBRUIK ENKEL BOUGIES VAN HET
AANBEVOLEN TYPE, ANDERS ZOU-
DEN DE PRESTATIES EN DE DUUR
VAN DE MOTOR GESCHAAD KUN-
NEN WORDEN.
Technische kenmerken
Afstand van de elektroden van de bou-
gie
0,6 mm