Advertisement
Quick Links
3
REMOVING
THE EXHAUST SILENCER
Carefully read page 47 (MAINTENANCE).
Position the vehicle on the centre stand,
on a solid and level surface.
WARNING
Before you go on with the following op-
erations, allow the engine and the silencer
to cool down to the ambient temperature
to avoid burns.
use and maintenance Scarabeo 50
66
1
Unloose and remove the two fixing screws
(1) from the engine silencer.
Screws (1) driving torque:
25 Nm (2.5 kgm).
Unloose and remove screws (2).
Screws (2) driving torque:
12 Nm (1.2 kgm).
Remove the exhaust silencer (3).
- Scarabeo 100 4T
2
NOTE
between the exhaust manifold and the si-
lencer with a new one.
On reassembly, replace the seal
Advertisement
Related Manuals for APRILIA SCARABEO 100 4T - 06-2001 PART9
Summary of Contents for APRILIA SCARABEO 100 4T - 06-2001 PART9
- Page 1 REMOVING Unloose and remove the two fixing screws NOTE On reassembly, replace the seal (1) from the engine silencer. THE EXHAUST SILENCER between the exhaust manifold and the si- lencer with a new one. Screws (1) driving torque: Carefully read page 47 (MAINTENANCE). 25 Nm (2.5 kgm).
-
Page 2: Removing The Exhaust Silencer
REMOVING Remove the inspection cover, see page 65 NOTE On reassembly, replace the seal (REMOVING THE INSPECTION COVER). THE EXHAUST SILENCER between the exhaust manifold and the si- lencer with a new one. Unloose and remove the two fixing screws Carefully read page 47 (MAINTENANCE). -
Page 3: Removing The Footboard
REMOVING THE FOOTBOARD CHECKING THE STAND CAUTION Carefully read page 47 (MAINTENANCE). Do not force the lower shield as it is fixed Carefully read page 47 (MAINTENANCE). to the frame with only two front screws. Make sure the stand (1) rotates freely. Remove the inspection cover, see page 65 NOTE On reassembly, first insert the two... -
Page 4: Checking The Switches
CHECKING THE SWITCHES IDLING ADJUSTMENT WARNING Carefully read page 47 (MAINTENANCE). Carefully read page 47 (MAINTENANCE). Before proceeding, make sure that the room in which you are working is prop- The vehicle is provided with two switches: Adjust the idling after the first 500 km (312 erly ventilated. -
Page 5: Adjusting The Accelerator Control
After the adjustment: CAUTION Tighten the nut (3), thus locking the adjuster (4) and put back the protection element (2). If necessary, contact your aprilia Official Dealer. use and maintenance Scarabeo 50 - Scarabeo 100 4T... -
Page 6: Spark Plug
from its seat, taking care that neither dust SPARK PLUG Tighten the spark plug by means of the nor other substances enter the cylinder. spanner you will find in the tool kit, giving it Carefully read page 47 (MAINTENANCE). Make sure that there are neither carbon half a turn to compress the washer. - Page 7 NOTE If servicing or technical advice is a face mask and/or goggles during main- WARNING required, contact an aprilia Official Dealer tenance operations. Risk of fire. that will certainly give you accurate and fast In case of contact with the skin, rinse with Keep fuel and other flammable sub- assistance.