Table of Contents
Advertisement
Carefully read p. 45 (MAINTENANCE).
N
Position the vehicle on the centre stand
on firm and level ground.
WARNING
Before performing the operations de-
scribed below, let the engine and the
exhaust silencer cool down until they
have reached room temperature, in or-
der to avoid burns.
N
Unscrew and remove the three screws
(1).
N
Remove the protection cover (2).
N
Unscrew and remove the two screws (3)
and (4) that fasten the exhaust silencer
to the engine.
Screw (3) and (4) driving torque:
25 Nm (2.5 kgm).
CAUTION
If the additional flange (7) is provided,
do not unscrew the screws (8) and (9),
but follow the procedure described here
below.
N
Unscrew and remove the screws (5) and
(6).
Screw (5) and (6) driving torque:
12 Nm (1.2 kgm).
N
Remove the exhaust silencer.
NOTE
Upon reassembly, replace the
gasket positioned between the exhaust
manifold and the silencer with a new one.
use and maintenance Scarabeo 50 - Scarabeo 100
61
Advertisement
Table of Contents
