Table of Contents
Advertisement
Carefully read p. 45 (MAINTENANCE).
CAUTION
Upon disassembly, take care not to
damage the brake pipe, disc and pads.
N
Position the vehicle on the centre stand
on firm and level ground.
N
Unscrew and remove the two screws (1).
Brake caliper screw driving torque (1):
27 Nm (2.7 kgm).
WARNING
Upon reassembly of the brake caliper,
replace the caliper fastening screws (1)
with two new screws of the same type.
CAUTION
Never pull the rear brake lever after re-
moving the brake caliper, otherwise the
caliper pistons may go out of their
seats, thus causing the outflow of the
brake fluid.
In this case consult your
Dealer, who will carry out the proper
maintenance operation.
N
Remove the brake caliper (2), by careful-
ly withdrawing it from the brake disc.
WARNING
After reassembly, pull the rear brake le-
ver repeatedly and check the correct
functioning of the braking system.
Carefully read p. 45 (MAINTENANCE).
N
Position the vehicle on the centre stand
on firm and level ground.
N
Lift the protection element (3).
Official
Support the rear-view mirror (4), to pre-
vent it from accidentally falling down.
N
Keep the screw (5) locked and loosen
the nut (6) completely.
N
Remove the rear-view mirror (4).
use and maintenance Scarabeo 50 - Scarabeo 100
CAUTION
59
Advertisement
Table of Contents
