Changing The Tail Light Bulb - APRILIA RSV MILLE R TUONO - 2002 Manual

CHANGING THE TAIL LIGHT BULB

Carefully read p. 130 (BULBS).
NOTE
The tail light houses two parking
light/stoplight bulbs (1).
The following operations refer to a single
bulb, but are valid for both.
B e f o r e c h a n g i n g a b u l b , c h e c k t h e
efficiency of the stoplight switches, see p.
126 (CHECKING THE SWITCHES).
134
use and maintenance RSV mille TUONO
1
◆
Position the vehicle on the stand, see p.
82 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Unscrew and remove the two screws (2).
◆
Remove the protection screen (3).
NOTE
Upon reassembly, correctly
position the protection screen in its seat.
Tighten the screws (2) carefully, without
exerting too much pressure, in order to
avoid damaging the protection screen.
◆
Press the bulb (1) slightly and rotate it
anticlockwise.
◆
Extract the bulb (1) from its seat.
Insert the bulb in the bulb socket,
making the two bulb pins coincide with
the relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
 
- RSV mille R TUONO
1 3
2