APRILIA RSV MILLE R TUONO - 2002 Manual page 41

Press the push button  to change the
◆
unit of measurement from "km" to "mi"
(from "km/h" to "MPH") or viceversa.
◆
To confirm the setting, press the push
button  for about five seconds.
S E T T I N G T H E I N S T A N T A N E O U S ,
M A X I M UM A N D A V E R AG E S P E E D
(LEFT DISPLAY)
NOTE
Two seconds after the vehicle has
started moving, the instantaneous speed is
automatically shown on the display, even if
a different function is set.
When the ignition key is rotated to position
"", the instantaneous speed (9) and the
partial number of kilometres/miles covered
"trip 1" (10) appear on the display.
Resetting "trip 1" (10): with the odometer
set on the instantaneous speed function,
press the push button  for about two
seconds.
◆
To display the maximum speed (14) and
the distance "trip 1" (10), press the push
button  for about one second. The
writing "V max" (15), the maximum
speed (14) and the distance "trip 1" (10)
are displayed.
Resetting the maximum speed (14): with the
odometer set on the "V max" function, press
the push button  for about 2 seconds.
NOTE
The measurement of the maximum
speed is relevant to the distance covered from
the last setting to zero of the maximum speed
itself. The distance "trip 1" (10) shown on the
display indicates the
kilometres/miles covered from the last setting
to zero, to the distance "trip 1".
◆
To display the average speed (16) and
the distance "trip 2" (17), press the push
button  again for about 1 second.
The writing "AVS" (18), the average speed
(16) and the distance "trip 2" (17) are
displayed.
Resetting the average speed (16) and the
distance "trip 2" (17): with the odometer set
on the "AVS" function, press the push
button  for about 1 second.
NOTE
The measurement of the average
speed is relevant to the distance "trip 2"
(odometer).
The distance "trip 2" (17) shown on the
d i s p l a y i n d i c a t e s t h e n u m b e r o f
kilometres/miles covered from the last
setting to zero.
If more than 1000 km (625 mi) are covered
without setting "trip 2" to zero, the value of
number of
the average speed will be wrong.
◆
To display the instantaneous speed (13)
and the distance "trip 1" (10), press the
push button  again.
use and maintenance RSV mille TUONO
 
41
- RSV mille R TUONO