Rear Case (Supplied As Standard Equipment In The Countries Where Required) - APRILIA PEGASO 650 IE - 2004 Manual

Hide thumbs Also See for PEGASO 650 IE - 2004:
Table of Contents

Advertisement

REAR CASE
(supplied as
standard equipment in the
countries where required)
Thanks to the use of the rear case, you no
longer have to carry the crash helmet or
other bulky objects with you every time you
park the vehicle.
NOTE
Write down your personal data
on the appropriate plate positioned on the
lock.
Clean and lubricate the coupling lock on
the lower part of the case every 6000 km
(3750 mi) or 12 months.
NOTE
If the rear case is not installed on
the vehicle, before using it, it is necessary
to install the appropriate supports, see p.
68 (INSTALLING THE REAR CASE
SUPPORTS
(supplied as standard
e q u i p m e n t i n t h e c o u n t r i e s w h e r e
required)).
To open the rear case, proceed as
follows:
u
Position the vehicle on the stand, see p.
49 (POSITIONING THE VEHICLE ON
THE STAND).
u
Introduce the key (1) in the lock.
u
Rotate the key (1) clockwise.
u
Remove the handle (2).
u
Lift the lock (3).
u
Release the upper part (4) of the lock (3)
from the case (5).
u
Lift the upper part of the case to open it (5).
NOTE
The case can contain two "FULL-
FACE" helmets.
Two keys are supplied together with the
vehicle (one spare key).
NOTE
Do not keep the spare key on the
vehicle.
WARNING
Do not load the rear case excessively.
Maximum allowed weight: 5 kg.
To remove the rear case, proceed as
follows:
u
Introduce the key (1) in the lock.
u
Rotate the key (1) clockwise.
u
Extract the handle (2) and grasp it firmly
with one hand.
u
Press the appropriate push button (6).
Lift the case (7) and withdraw it from the
u
relevant front couplings.
CAUTION
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care to avoid scraping
or damaging them.
WARNING
Upon reassembly, make sure that the
c a s e i s p r o p e r l y a n c h o r e d t o i t s
support.
Front part: perfect fitting of the support
coupling elem ents into the se ats
provided on the case;
Rear part: perfect fitting of the support
coupling pin in the relevant lock on the
case; when the lock snaps, the coupling
is correct.
use and maintenance Pegaso 650 I.E.
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents