APRILIA PEGASO 650 IE - 2004 Manual page 84

HIGH BEAM BULBS
u Move the protection element (4) with
your hands.
u Grasp the electric terminal (5), pull it and
disconnect it from the bulb (1).
u Release the check spring (6) positioned
at the rear of the bulb socket (7).
u Extract the bulb (1) from its seat and
replace it with a new one of the same
type.
NOTE
Insert the bulb in the bulb socket,
making the relevant positioning seats
coincide.
84 use and maintenance Pegaso 650 I.E.
PARKING LIGHT BULB
u Move the protection element (8) with
your hands.
CAUTION
To extract the bulb socket, do not pull
the electric wires.
u Grasp the parking light bulb socket (9),
pull it and remove it from its seat.
u Withdraw the bulb (2) and replace it with
one of the same type.
LOW BEAM BULB/HIGH BEAM
u Move the protection element (10) with
your hands.
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
u Grasp the bulb electric connector (11),
pull it and disconnect it from the bulb (3).
u Rotate the bulb socket (12) anticlockwise
and extract it from its seat.
u Press the bulb (3) slightly and rotate it
anticlockwise.
Extract the bulb (3) from its seat and
u
replace it with a new one of the same
type.
NOTE
Insert the bulb in the bulb socket,
making the appropriate tangs (13) coincide
with the rel eva nt se ats ( 14) on the
reflector.