Table 31 Call Forward - ZyXEL Communications PRESTIGE 2302RL User Manual

Table 31 Call Forward

LABEL
Table Number
Forward to
Number Setup
Unconditional
Forward to
Number
Busy Forward to
Number
No Answer
Forward to
Number
No Answer
Waiting Time
Advanced Setup
Activate
Incoming Call
Number
Forward to
Number
Condition
Apply
Reset
Chapter 10 Phone Book
DESCRIPTION
Select which call forwarding table you want to configure. You can configure a
different call forwarding table for each SIP account or use the same call forwarding
table for both.
The following applies to the number fields in this screen.
Enter a SIP number, use the number or text that comes before the @ symbol in a
full SIP URI. You can use up to 127 ASCII characters.
These are the global call forwarding settings that define the default action to take
on incoming calls that do not match any of the Advanced Setup call forwarding
entries.
Enable this feature to have the Prestige forward all incoming calls to the number
that you configure regardless of whether or not the phone(s) connected to the
phone port(s) is busy.
Enable this feature to have the Prestige forward incoming calls to the number that
you configure when the phone(s) connected to the phone port(s) is busy. With call
waiting a second call is only forwarded after being rejected.
Enable this feature to have the Prestige forward incoming calls to the number that
you configure whenever you do not answer the call after a specific time period.
Set how long the Prestige should let a call ring before considering the call
unanswered.
Configure Advanced Setup call forwarding entries to have the Prestige perform
specific actions on calls from specific numbers. If a caller's number does not match
the Incoming Call Number of any of these entries, the Prestige performs the
default action configured in the Forward to Number Setup section.
Select this check box to turn on an call forwarding entry.
You can set the Prestige to take a particular action on incoming calls from a
number that you specify here.
You can set the Prestige to forward incoming calls to a number that you specify
here.
Select under what circumstances you want the Prestige to use this call forwarding
entry.
Select Unconditional to have the Prestige immediately forward any calls from the
number specified in the Incoming Call Number field to the number in the Forward
to Number field.
Select Busy to have the Prestige forward any calls from the number specified in
the Incoming Call Number field to the number in the Forward to Number field
when your SIP account has a call connected.
Select No Answer to have the Prestige forward any calls from the number
specified in the Incoming Call Number field to the number in the Forward to
Number field when the No Answer Waiting Time period expires (whether or not
the no answer feature is enabled in the Forward to Number Setup section).
Select Block to have the Prestige reject calls from the number specified in the call
forwarding entry.
Select Accept to have the Prestige allow calls from the number specified in the
Incoming Call Number field.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
P-2302R Series User's Guide
127