Chapter 11 Phone Usage; Dialing A Telephone Number; Using Speed Dial To Dial A Telephone Number; Internal Calls - ZyXEL Communications PRESTIGE 2302RL User Manual

This chapter describes how to use a phone connected to your Prestige for basic tasks.

11.1 Dialing a Telephone Number

The VoIP/PWR LED turns orange when your SIP account is registered. Dial a SIP number
like "12345" on your phone's keypad.
Use speed dial entries (see
that use letters. Dial the speed dial entry on your telephone's keypad.
Use your voice service provider's dialing plan to call regular telephone numbers.

11.2 Using Speed Dial to Dial a Telephone Number

After configuring the speed dial entry and adding it to the phone book, press the speed dial
entry's key combination on your phone's keypad.

11.3 Internal Calls

Press "####" on your phone's keypad to call the Prestige's other phone port.

11.4 Checking the Prestige's IP Address

Do the following to listen to the Prestige's IP current address.
1 Pick up your phone's receiver.
2 Press "****" on your phone's keypad and wait for the message that says you are in the
configuration menu.
3 Press "5" followed by the # key.
4 Listen to the IP address and make a note of it.
5 Hang up the receiver.

Chapter 11 Phone Usage

C
H A P T E R
Section 10.2 on page 123) for peer-to-peer calls or SIP numbers
P-2302R Series User's Guide
Phone Usage
11
129