Sample Configurations; Connecting To The Zyxel Device With Telnet - ZyXEL Communications P-974H - QUICK GUIDE V3.70 Quick Manual

ENGLISH

Sample Configurations

The following are some sample configurations for your ZyXEL Device.
The values used in these samples are for example purposes only;
please use the values provided by your ISP where appropriate.

Connecting to the ZyXEL Device with Telnet

Before you can use these sample configurations, you must first connect
to the ZyXEL Device with Telnet.
1. Open your Command Line prompt or terminal application.
2. Telnet to 198.162.1.1.
3. Login as admin (default password "1234").
After connecting to the ZyXEL Device, you can enter any of the
commands in the following samples. Be sure to customize them first.
13