The Wps/Wlan Button - ZyXEL Communications P-661HNU Manual

Chapter 1 Introduction
Figure 4 USB File Sharing / Print Server Application

1.3 The WPS/WLAN Button

You can use the WPS button (
LAN off or on. You can also use it to activate WPS in order to quickly set up a
wireless network with strong security.
Turn the Wireless LAN On or Off
Make sure the POWER LED is on (not blinking).
1
Press the WPS button for one second and release it. The WLAN/WPS LED should
2
change from off to on or vice versa.
Activate WPS
Make sure the POWER LED is on (not blinking).
1
Place the devices you want to connect near one another.
2
Press the WPS button on top of the ZyXEL Device for more than five seconds and
3
release it to turn the WPS function on. Repeat this procedure when you want to
turn the WPS function off.
Press the WPS button on another WPS -enabled device within range of the ZyXEL
4
Device. The WLAN/WPS LED should flash while the ZyXEL Device sets up a WPS
connection with the wireless device.
The WLAN/WPS light on the P-661HNU-Fx shines steadily when connected.
5
24
A
B
) on the top of the device to turn the wireless
P-661HNU-Fx User's Guide