Setting Up Nat Port Forwarding - ZyXEL Communications P-661HNU Manual

Chapter 3 Tutorials
Click Start or Apply in the other device's utility screen within two minutes of
6
clicking Register in the ZyXEL Device web configurator screen.
The ZyXEL Device and the other WPS-enabled device establish a secure
7
connection. This can take up to two minutes.
Your computer is now ready to connect to the Internet wirelessly through your
8
ZyXEL Device.
Note: You must repeat this procedure for every device you want to add to your
network using WPS.

3.4 Setting Up NAT Port Forwarding

In this tutorial, you manage the Doom server on a computer behind the ZyXEL
Device. In order for players on the Internet (like A in the figure below) to
communicate with the Doom server, you need to configure the port settings and IP
address on the ZyXEL Device. Traffic should be forwarded to the port 666 of the
Doom server computer which has an IP address of 192.168.1.34.
Tutorial: NAT Port Forwarding Setup
D=192.168.1.34
You may set up the port settings by configuring the port settings for the Doom
server computer (see
Click Network Setting > NAT > Port Forwarding. Click Add new rule.
1
50
LAN
port 666
Chapter 11 on page 190
WAN
A
for more information).
P-661HNU-Fx User's Guide