Telecommuters Sharing One Vpn Rule Example; Telecommuters Using Unique Vpn Rules Example - ZyXEL Communications P-661HNU Manual

Chapter 16 VPN

16.6.11.1 Telecommuters Sharing One VPN Rule Example

See the following figure and table for an example configuration that allows
multiple telecommuters (A, B and C in the figure) to use one VPN rule to
simultaneously access a ZyXEL Device at headquarters (HQ in the figure). The
telecommuters do not have domain names mapped to the WAN IP addresses of
their IPSec routers. The telecommuters must all use the same IPSec parameters
but the local IP addresses (or ranges of addresses) should not overlap.
Figure 106 Telecommuters Sharing One VPN Rule Example
192.168.2.12
192.168.3.2
192.168.4.15
Table 67 Telecommuters Sharing One VPN Rule Example
FIELDS
My IP Address:
Secure Gateway
IP Address:
Local IP Address:
Remote IP
Address:

16.6.11.2 Telecommuters Using Unique VPN Rules Example

In this example the telecommuters (A, B and C in the figure) use IPSec routers
with domain names that are mapped to their dynamic WAN IP addresses (use
Dynamic DNS to do this).
With aggressive negotiation mode (see
Device can use the ID types and contents to distinguish between VPN rules.
Telecommuters can each use a separate VPN rule to simultaneously access a
ZyXEL Device at headquarters. They can use different IPSec parameters. The local
IP addresses (or ranges of addresses) of the rules configured on the ZyXEL Device
238
A
LAN
B
LAN
C
LAN
TELECOMMUTERS
0.0.0.0 (dynamic IP address
assigned by the ISP)
Public static IP address
Telecommuter A: 192.168.2.12
Telecommuter B: 192.168.3.2
Telecommuter C: 192.168.4.15
192.168.1.10
HQ
HEADQUARTERS
Public static IP address
0.0.0.0 With this IP address
only the telecommuter can initiate
the IPSec tunnel.
192.168.1.10
0.0.0.0 (N/A)
Section 16.6.6 on page
P-661HNU-Fx User's Guide
LAN
192.168.1.10
234), the ZyXEL