Figure 15 Basic: Wireless: WLAN Security Setup: WPA-Enterprise
The following table describes the related labels in this screen.
Table 14 Basic: WLAN Security Setup: WPA-Enterprise
LABEL
WPA
WPA Mode
Cipher Type
Group Key Update
Interval
PRE SHARED
KEY
Pre-Shared Key
Chapter 3 Basic
DESCRIPTION
Specify a WPA mode. Make sure the peer device(s) is also set to use the same
WPA mode.
Select WPA to set the P-336M to use WPA only. WPA is a older implementation
than WPA2.
Select WPA2 to set the P-336M to use WPA2 first and then WPA if connection fails
with WPA2.
Select WPA2 Only to set the P-336M to use WPA2 only.
Specify the encryption mechanism. Select TKIP, AES or TKIP and AES.
This is the rate at which an AP or RADIUS server sends a new group key out to all
clients. The re-keying process is the WPA equivalent of automatically changing the
WEP key for an AP and all stations in a WLAN on a periodic basis.
Enter an update time in seconds.
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
ZyXEL P-336M User's Guide
40