Wan Configuration: Pppoe; Figure 7 Basic: Wan: Static Ip; Table 7 Basic: Wan: Static Ip - ZyXEL Communications P-336M User Manual

Figure 7 Basic: WAN: Static IP

The following table describes the related fields in this screen.

Table 7 Basic: WAN: Static IP

LABEL
MODES
WAN
Static IP
IP Address
Subnet Mask
Default Gateway

3.2.5 WAN Configuration: PPPoE

The P-336M supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft
standard (RFC 2516) specifying how a computer interacts with a broadband modem (DSL,
cable, wireless, etc.) connection. The PPPoE option is for a dial-up connection using PPPoE.
For the service provider, PPPoE offers an access and authentication method that works with
existing access control systems (for example Radius). PPPoE provides a login and
authentication method that the existing Microsoft Dial-Up Networking software can activate,
and therefore requires no new learning or procedures for Windows users.
One of the benefits of PPPoE is the ability to let you access one of multiple network services,
a function known as dynamic service selection. This enables the service provider to easily
create and offer new IP services for individuals.
Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as it requires
no specific configuration of the broadband modem at the customer site.
Chapter 3 Basic
DESCRIPTION
Select Static IP if your ISP gives you a fixed public IP address.
Enter your WAN IP address in dotted decimal notation (for example,
192.168.1.1).
Enter the IP subnet mask (if your ISP gave you one) in dotted decimal notation
(for example, 255.255.255.0).
Enter the gateway IP address (if your ISP gave you one) in dotted decimal
notation.
ZyXEL P-336M User's Guide
28