ZyXEL Communications NSA221 User Manual page 28

Chapter 2 NAS Starter Utility
Start the NAS Starter Utility (click the icon in your Desktop or in Start >
Programs > ZyXEL > NAS Starter Utility). The first time you open the NAS
Starter Utility the discovery screen appears as follows.
Figure 4 NAS Discovery
The following table describes the labels in this screen.
Table 2 NAS Discovery
LABEL
Refresh
Hostname
28
DESCRIPTION
Click this to refresh the screen. The NAS Starter Utility does not
automatically refresh.
This is the server name you configured for the NSA. If you have more
than one NSA in your network, it is recommended that you give each
one a unique name for identification purposes.
If you have several NSAs connected to your computer/network, hover
your mouse over the host name to view the details of each device. A
box pops up containing details about the NSA.
Hostname shows the NSA's configured server name.
IP shows the NSA's current IP address.
Model ID shows the NSA's model name.
Firmware Version shows the version of firmware the NSA is currently
using.
Status shows whether the NSA is Online, Unreachable,
Configuring, or Config Failed.
NSA221 User's Guide