Nas Starter Utility - ZyXEL Communications NSA221 User Manual

2-bay digital media server
Hide thumbs Also See for NSA221:
Table of Contents

Advertisement

Chapter 17 Troubleshooting

17.3 NAS Starter Utility

The NAS Starter Utility cannot discover my NSA.
• Close the NAS Starter Utility and reopen it.
• Check your hardware connections and make sure they are set up correctly.
• Only one instance of the NAS Starter Utility can run on your computer. Make
sure you close any duplicate windows for this application.
• Wait for the SYS LED to stop blinking before clicking Discover.
• Confirm that the computer running the NAS Starter Utility has a network
connection. See the section on the NSA's LAN connection for related
information.
• The computer running the NAS Starter Utility can only discover NSAs in the
same subnet. NSAs connected to the same switch or router as your NAS Starter
Utility computer are usually in the same subnet unless the router is doing
subnetting or the switch is implementing VLAN.
• The Memeo Autobackup program uses the same network port as the NAS
Starter Utility to discover the NSA. To avoid a port conflict, do not run the
Memeo Autobackup program at the same time as the NAS Starter Utility.
I was able to access the NSA on a previous attempt but I cannot access the NSA
anymore.
If you enable jumbo frames on the NSA in a network that does not support them,
you will lose access to the NSA. If this occurs, you will have to restore the factory
default configuration. The reset process does NOT affect the volume settings, nor
data stored on the NSA. Push the RESET button on the NSA's rear panel and
release it after you hear a beep
I have at least two NSAs in my network, how do I identify which one I want to
configure in the NAS Starter Utility screens.
If you have several NSAs connected to your computer/network, give each a
unique name. You may have to disconnect all but one and use the NAS Starter
Utility to rename it. Then connect another NSA and rename it and continue to
connect and rename the NSAs one-by-one until they are all connected and each
has a unique name.
342
(Section 17.4.1 on page
344).
NSA221 User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nsa221 - v 4.00 edition 1

Table of Contents