Firmware Features - ZyXEL Communications NSA221 User Manual

Chapter 18 Product Specifications
Table 116 Physical Features (continued)
Power Button
COPY/SYNC Button
RESET Button

18.2 Firmware Features

These are some of the main firmware features of the NSA.
Table 117 Firmware Features
DLNA Server
RAID File Storage
User Passwords
360
Press the Power button for one second to turn it on.
Turn off the NSA before unplugging it.
Press the Power button for 3 seconds until you hear
one beep, then release it. The NSA goes starts to
shutdown its software and turns off.
Press the Power button for 5 seconds until you hear
two beeps, then release it. The NSA turns off
immediately.
The COPY/SYNC button is used to copy or sync data from
the NSA to a compatible external (USB) storage device or
from the external (USB) storage device to the NSA.
Press the COPY/SYNC button to copy data from Public
folder (default) of the NSA. Use the Web Configurator to
configure the folder locations for the COPY/SYNC function.
During the data transfer, the COPY LED blinks and stops
when the transfer is complete.
If you want to sync the data in the NSA with the external
(USB) storage device, press the COPY/SYNC button until
you hear one beep.
If the COPY LED turns red, an error has occurred and the
transfer is stopped. Press the COPY/SYNC button once and
the COPY LED turns green.
Press the RESET button for 2 seconds to restart the NSA.
If you forget your (admin) password, press the RESET
button for 10 seconds to restore the factory default
password to "1234" (with username "admin"), and auto-IP
address (DHCP client).
The NSA is a DLNA-compliant media server that lets DLNA-
compliant media clients play video, audio, and photo content
files stored on the NSA.
Use RAID 1 if you have two drives and want to mirror
primary data to the second drive. If one drive fails, replace it
and then re-synchronize to recover all data.
Configure a password for an individual User to restrict
access to the NSA.
NSA221 User's Guide