Table of Contents
Advertisement
Hardware Connections
1. To set up your Internet connection, choose:
a. FIBER (CATV): Use a fiber cable to connect this port to the CATV
fiber outlet; OR
b. FIBER (DATA): If you have an FSG2200, follow the steps in
Connecting to a
FSG2200HNU to connect to a fiber network resulting in faster data
transfer rates.
2. CATV: Use a coaxial cable to connect this port to your television.
3. POWER: Use the power adaptor provided to connect an appropriate
power source to this socket. The LED light turns green once the
FTU2000 is ready.
If you are using both FTU2000 and FSG2200HNU, the power coming
from the FSG2200HNU is enough for both devices and there is no need
to connect the FTU2000 to a power source. In this setup, the CATV
service is not available when the FSG2200HNU is turned off.
4. Verify that the hardware setup is working by turning on your
television. You should be able to watch the CATV channels indicated
in your subscriber plan.
Contact your CATV provider if you cannot access the cable channels.
4
FSG2200HNU. The FTU2000 enables the
Advertisement
Table of Contents
