Table of Contents
Advertisement
Connecting to a FSG2200HNU
If you have subscribed to both CATV and fiber-based Internet services
but have only one fiber outlet at home, you can use the FTU2000 to
bridge the fiber port to the FSG2200HNU. Follow these steps to connect
the FTU2000 to the FSG2200HNU.
Before proceeding, the fiber cables (CATV and data) should be
connected to the FTU2000 and properly coiled within the casing. Refer
to
Coiling the Fiber Cables
1. The FTU2000 has a nodule on the top panel that serves as an
opening for the fiber cable going to the FSG2200HNU. Remove the
screw holding the cover in place.
2. On the bottom panel of the FSG2200HNU, lift off the cover of the fiber
port. Connect the fiber cable (data) coming from the FTU2000 to this
port.
for instructions.
5
Advertisement
Table of Contents
