Configuring Switch Management Ip Address - ZyXEL Communications GS2200-24 User Manual

Chapter 5 Initial Setup Example

5.2 Configuring Switch Management IP Address

The default management IP address of the Switch is 192.168.1.1. You can
configure another IP address in a different subnet for management purposes. The
following figure shows an example.
Figure 19 Initial Setup Example: Management IP Address
Connect your computer to any Ethernet port on the Switch. Make sure your
1
computer is in the same subnet as the Switch.
Open your web browser and enter 192.168.1.1 (the default IP address) in the
2
address bar to access the web configurator. See
information.
Click Basic Setting > IP Setup in
3
the navigation panel.
Configure the related fields in the IP
4
Setup screen.
For the VLAN2 network, enter
5
192.168.2.1 as the IP address and
255.255.255.0 as the subnet mask.
In the VID field, enter the ID of the
6
VLAN group to which you want this
management IP address to belong.
This is the same as the VLAN ID you
configure in the Static VLAN screen.
Click Add to save your changes back
7
to the run-time memory. Settings in
the run-time memory are lost when
the Switch's power is turned off.
54
Section 4.2 on page 43
GS2200-24 User's Guide
for more