LENCO DVT-1946 Manuel De L'utilisateur page 46

Teletext Function
: Press this button to enter teletext state and display teletext page. If you want to exit teletext state, press this button
again. When teletext page is displayed on the screen, you can select relevant function by using the remote control.
: If you want to display image and teletext page at the same time, press this button. Press it agin to release it.
: It is refer to the subpage of teletext page, i.e subcode page. When it is pressed, the screen display the requirement of
subpage code entry. If there is on subpage, it will not be displayed. In most case, there is no subpage.
: Press this button if you want to keep the displaying of the page and press it again to exit hold state.
:
Press this button if you do not want to display the content of the page, but only the channel image.
Press it again to display the content of the page again.
Number buttons 0~9 on the remote control can be used to get to a certain page. "o/p" button on the remote control can be
used to display the content of previous or next page.
Press the RED/GREEN/YELLOW/CYAN button on the remote control, the page of relevant color displayed on the lower part
of the screen will be displayed.
: Press this button if you want to enlarge the content on the upper part of the page, and press the second time to enlarge
the content on the lower part of the page, and the third time to resume normal display of all the contents on the page.
: Press this button if you want to display the concealed text. Press it again to close the display of concealed text.
: Press this button if you want to display the index for all the teletext page.
FAST TEXT:
The RED, GREEN, YELLOW & CYAN buttons are used for quick access to color coded pages transmitted by FAST TEXT
broadcast.
Example:
RED selects CITY INFORMATION,
CYAN selects TRAVEL INFORMATION,
GREEN selects WEATHER INFORMATION,
YELLOW selects TV PROGRAMMING.
How to operate USB/SD card
This unit can read USB/SD card playback the fi les in it. Before insert the USB device or your SD Card:
1.Press [SOURCE] to select "DVD" source.
2.Press [USB/CARD] to select "USB" or " SD CARD" function.
The other operation is the same as we described in "BUILD-IN DVD PLAYER OPERATION" chapter.
EPG/GOTO ZOOM
E6
l
n DISC MENU SUBTITLE
X
REPEAT
f e
d
A-B
c