Lan Interface Setup - Sapido RB-1232 User Manual

N+ broadeband router

Hide thumbs Also See for RB-1232:

Table of Contents

4.2.2

LAN Interface Setup

If you are using N+ Broadband Router with multiple PCs on your LAN, you must connect the

LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP

address to each device residing on your LAN. The LAN IP address identifies the router as a

node on your network; that is, its IP address must be in the same subnet as the PCs on your

LAN. The default LAN IP for the Internet Security Router is 192.168.1.1.

For Gateway IP Address, the IP address 192.168.1.xxx (xxx can be any number between 1

and 254 that is not used by another device.) Please don' t change the default LAN IP settings

at this section until you have completed the rest of the configurations and confirm that your

Internet connection is working.

Click on Next button to proceed.

http://www.sapido.com.tw

User' s Manual V1.0

Table of Contents