Time Zone Setting - Sapido RB-1232 User Manual

5.5.4

Time Zone Setting

The System time is the time used by N+ Broadband Router for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If a NTP server is
set, you will only need to set the time zone. If you manually set the time, you may also set
Daylight Saving dates and the system time will automatically adjust on those dates.
This function allows users to select their time zone and NTP server. Users can adjust the time
manually or through the NTP server.
1. Current Time
Users can input the time manually.
2. Time Zone Select
Select your time zone location from the drop-down list.
3. Enable NTP client update
Check to enable NTP client update.
4. Automatically Adjust Daylight Saving
If you are in daylight saving time area, please enable this item.
5. NTP server
Please select the NTP server from the pull-down list, or you can enter the NTP server IP
address manually.
http://www.sapido.com.tw
90
Please select
the time
zone.
User' s Manual V1.0