Sanyo VCC-HD5400 User Manual page 70

Select and configure the white balance adjustment mode.
ATW: Auto trace white balance
AWC: Auto white balance control
3200: Fixed white balance (for indoors)
Fixed white balance (for outdoors)
5600:
FLUORESCENT: Selects the Fixed white balance mode (for fluorescent lighting).
MWB: Manual white balance
The configured settings are applied only to the camera views that were specified in [VIEW].
Auto trace white balance (ATW) automatically adjusts the white balance to provide optimal colors, even if the light
source for the target object is changed.
1
In [WHITE BALANCE], select "ATW".
2
In [SMART ATW], select "ON" and click
The camera now adjusts the white balance automatically based on the color information on the subject.
Enable the smart ATW function here because ATW may not produce desirable results if a single solid color
occupies a large part of the subject.
Do not use the smart ATW function in environments where the color temperature fluctuates.
In an outdoor environment for example, smart ATW may not produce desirable results because the
color temperature fluctuates depending on the time of the day (at sunrise, daytime, and sunset),
weather (sunny or cloudy), and other conditions.
In [MASKING], select "ON" and click
1
The ATW masking screen appears.
Mask the light source by the following procedure.
SET .
.
SET
Working with Administrator Configuration Screens 24/79