Sanyo VCC-HD5400 User Manual page 60

Click VIDEO/AUDIO in the configuration menu to display the VIDEO & AUDIO SETTINGS screen.
On this screen, configure the conditions of each video stream and the audio you receive from the camera.
A
Configuring Aspect Ratio and Recording
B Configuring Video
C Configuring the audio
D
Configuring TV output
Required operation privilege: admin, operator1
1 Click a radio button under [ASPECT RATIO] to select the aspect ratio (width-to-height ratio)
of the displayed image.
This setting applies to all video/image streams you are configuring.
16:9 (Landscape), 4:3 (Portrait)
Configuring input mode:
If "16:9" is selected, you can choose either "1080i 60" or "1080i 30".
If "4:3" is selected, "1200p 30" is set automatically.
2 To record a video stream, configure [RECORDING] to "ON" and click
If you configure to "OFF", you can only view the video streams and cannot record them.
Clicking SET
This camera supports multi-stream video transmission, allowing you to register up to four video/image streaming
condition patterns.
Thus, you can reduce the load of the entire system by choosing optimal settings for your application, such as
recording or live video monitoring.
reboots the camera.
SET
Working with Administrator Configuration Screens 14/79
.