Sanyo VCC-HD5400 User Manual page 104

3
In [ALARM OUT TIME], select how long you want the terminal to output the alarm signal
and click .
SET
The terminal will stop outputting the alarm signal when the set alarm output time expires.
2SEC, 5SEC, 10SEC, 15SEC, 30SEC, 45SEC, 1MIN, 2MIN, 3MIN, 4MIN, 5MIN
CC (Stops outputting the alarm signal when the corresponding Remote Alarm button is clicked on the live
screen.)
To configure the ALARM OUT 2 to output an alarm signal when a Remote Alarm button is
clicked, select "REMOTE" in [ALARM OUT2] and specify the output conditions for it in the
same way as for the ALARM OUT1.
Working with Administrator Configuration Screens 58/79