SATO M-8400RVe Operator And Technical Reference Manual page 98

Section 5: Programming Reference
Special Notes
Page 5-32
1. Use the Print Position commands (V and H) to locate the new
area for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axis will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable ranges for these fields are as follows:
Horizontal
aaaa
cccc
Vertical Default
bbbb
dddd
Vertical Expanded
bbbb
dddd
PN 9001075A
M-8400RVe
0001
to
0832
0001
to
1424
0001
to
9999
SATO M8400RVe